Fiber Optic Light Installation Method:
I. Ceiling Mount Installation

1. Use 9MM wooden board for ceiling installation, reserving 10CM height above the ceiling.

2. 

   Create openings on the ceiling directly above the center of each light fixture to ensure the controller can be placed above the ceiling.

3. Connect the fiber bundle connector of the light fixture to the controller, then connect the power cord to the controller and conduct a power-on test.

4. Secure the base plate to the wooden ceiling using 8-10CM self-tapping screws.

5. Adjust the starry sky light effect.

II. Rod Mount Installation

1. Customize 304 stainless steel extended expansion screws with a diameter of 8MM or 10MM, calculating the length based on the installation height of the light.

2. Fix the expansion screws on the ceiling according to the base plate dimensions, and create screw holes at corresponding positions on the base plate.

3. Connect the fiber bundle connector of the light fixture to the controller, then connect the power cord to the controller and conduct a power-on test.

4. Secure the base plate to the expansion screws.

5. Adjust the starry sky light effect.